While you can force the transfers over seams and joins in leather it will reduce the durability of the transfer as adhesion will not be 100% effective. You can then cover the transfer with the thin piece of fabric and apply a short burst of heat to seal it in place fully. While the transfer is still hot peel away the clear application film. Then apply heat and firm pressure at a temperature of 150 Celsius for 5 seconds (130 Celsius for 10 seconds on fabrics such as polyester and faux leather which are more effected by heat). If your heart and/or chest is not hurting and you feel no discomfort, then you should be fine. They can also be applied to leather and faux leather.Īpplication is simple, you need to remove the opaque backing layer, and position your transfer where you would like to apply it (you may need to hold it in place with some paper-based tape if it is in an awkward place).Ĭover the transfer with a thin piece of fabric to protect the surrounding area from heat. Use them in commercial designs under lifetime, perpetual & worldwide rights. Panda doing push ups emoticon meaning shellie.keylon Level 1 (Contributor) 1 Answer 0 0 It sounds like this is a normal process of recouperating after doing any sort of cardio exercise. It is recommended for use on cotton, polyester, cotton/polyester blends. The material itself is designed to be applied to a wide range of fabrics, including synthetics, performance wear and many designer textiles. Each set is printed using our 2,400 dpi eco-solvent printer, to give a vibrant image which will not fade from washing. These printed transfers are made using the highest quality materials and inks available. Each set comes with 9 transfers, one copy of each of the designs in the main image.
0 Comments
Leave a Reply. |